Common Ground 15′ Cord

This common ground point cord connects two wrist straps and a work surface to ground, assuring that all parts are at the same ground potential. Easy to install. Simply snap it to a mat or work surface. Plug in the wrist strap coil cord, and connect the ring terminal to ground.
– Provides the common ground point required in EIA 625, ESDA S6 and ANSI/ESD-S20.20
– Tough vinyl cord and strain relief provide a long service life
– Long, 15 foot cord
– 3/8” (10mm) stud (male) for mat connection
– #10 ring terminal for ground connection
– The common ground cords provide a common ground point required by ESD S6.1 & ANSI/ESD S20.20
Specifications:
– Length: 15ft
– Snap: 3/8” (10mm)
– Ground Connection: #10 ring terminal
– Insulation: PU/PVC Wire: 18 AWG 65 Strand high flex
– Resistor: 1 Meg Ohm mat to ground
– Colour: Black